diff --git a/README.txt b/README.txt
--- a/README.txt
+++ b/README.txt
0. FEATURES
-----------
0. FEATURES
-----------
-fits2jpeg is a tiny program to read FITS Images and convert them
-to jpeg, which is more popular. This software supports various
-type of intensity scaling and image enhancements. fits2jpeg do not
-support coordinate axes overlay. fits2jpeg supports batch mode
-operations - for instance, converting several fits files to jpeg
-at once.
+fits2jpeg is a tiny program to read FITS Images and convert them to jpeg, which
+is more popular. This software supports various type of intensity scaling and
+image enhancements. fits2jpeg do not support coordinate axes overlay. fits2jpeg
+supports batch mode operations - for instance, converting several fits files to
+jpeg at once.
1. BUILD/INSTALL
1. BUILD/INSTALL
http://heasarc.gsfc.nasa.gov/docs/software/fitsio/fitsio.html
b) JPEGLIB
http://heasarc.gsfc.nasa.gov/docs/software/fitsio/fitsio.html
b) JPEGLIB
- jpeg library and headers. libjpeg is installed by default on most
- platforms, but we need the header files too. Once you have cfitsio
- and jpeglib installed, you may proceed with compiling jpeg2fits.
+ jpeg library and headers. libjpeg is installed by default on most platforms,
+ but we need the header files too. Once you have cfitsio and jpeglib
+ installed, you may proceed with compiling jpeg2fits.
+
Follow these 4 steps:
Follow these 4 steps:
2. Type `make' to compile the package.
3. Type `make install' to install the programs and any data files and
2. Type `make' to compile the package.
3. Type `make install' to install the programs and any data files and
- documentation. By default, the binary is copied to /usr/local/bin.
- You may change this destination by passing on the following
- argument to configure:
+ documentation. By default, the binary is copied to /usr/local/bin. You may
+ change this destination by passing on the following argument to configure:
--prefix=/your/chosen/destination
Which would result in the binary in /your/chosen/destination/bin
You may need to ensure that in $PATH to run the program.
--prefix=/your/chosen/destination
Which would result in the binary in /your/chosen/destination/bin
You may need to ensure that in $PATH to run the program.
- 4. You can remove the program binaries and object files from the
- source code directory by typing `make clean'.
+ 4. You can remove the program binaries and object files from the source code
+ directory by typing `make clean'.
-You may read more about configure script and others in the accompanying
-file named `INSTALL.txt'.
+You may read more about configure script and others in the accompanying file
+named `INSTALL.txt'.
2.USAGE
-------
Usage: fits2jpeg [options] <fits_file>
2.USAGE
-------
Usage: fits2jpeg [options] <fits_file>
-
- Options are:
+ You need to specify a fits image file <fits_file> for this program to
+ work. Everything else is optional. A brief description of them are
+ listed below:
-h help
-h help
+ Prints out a usage-help message, much like this section.
-s <scale_type>
scale for output image, where <scale_type> can be:
-s <scale_type>
scale for output image, where <scale_type> can be:
normalize for linear histogram stretch
equalize for histogram equalization
normalize for linear histogram stretch
equalize for histogram equalization
+ -n
+ Negate the image
+
+ -q <value>
+ quality factor. Defines the jpeg encoding quality
+ Valid range: 0-100, default value: 100, which means
+ best quality and largest file-size.
+
+ -d <path/to/output/directory>
+ Write jpeg file to this specified directory. Will
+ create it if needed. Default is to write jpeg in the
+ same directory of fits image file
+
-r <min>:<max>
Clip output image to min-max range. Eg:
0:100 Use only values in the range 0-100
-r <min>:<max>
Clip output image to min-max range. Eg:
0:100 Use only values in the range 0-100
:10 Clip everything above 10
10: Clip everything below 10
:10 Clip everything above 10
10: Clip everything below 10
- -n
- Negate the image.
-
- -q <value>
- jpeg quality factor. Defines the jpeg encoding quality
- Valid range: 0-100, default value: 100, which is for
- best quality (and largest file size).
-
-z <zoomfactor>
Resize/Scale output image by <zoomfactor>. Eg:
0.5 Shrink output to half of input
2.0 Magnify output to double the size
-z <zoomfactor>
Resize/Scale output image by <zoomfactor>. Eg:
0.5 Shrink output to half of input
2.0 Magnify output to double the size
+ Allowed range: 0.01 to 4.0
+ NOTE: Zooming will be carried out after all other
+ operations, before writing out jpeg image
+ fits2jpeg uses a bilinear interpolation based algorithm
+ to scale the image. Allowed range: 0.01 to 4.0
+ NOTE: Anything outside the allowed range will be clipped
+ to this range.
Output will be written to <fits_file_root>.jpg. For eg.,
Output will be written to <fits_file_root>.jpg. For eg.,
writes output to jpeg file 30dor.jpg
writes output to jpeg file 30dor.jpg
- Wild card entries allowed in <fits_file>. For eg: *.fits,
- m31*.fits ngc???.fits etc.
+ Wild card entries allowed in <fits_file>. For eg: *.fits, m31*.fits
+ ngc???.fits etc.
- More examples:
+3.1 Examples:
+-------------
i. fits2jpeg -s log sirius.fits
i. fits2jpeg -s log sirius.fits
+
will write out sirius.jpg, flux/intensity in log scale
ii. fits2jpeg -s sqroot *.fits
will write out sirius.jpg, flux/intensity in log scale
ii. fits2jpeg -s sqroot *.fits
- Converts all fits files in the directory to jpegs, with
- square-root scaling of flux/intensity - Good for very
- high dynamic range images
+
+ Converts all fits files in the directory to jpegs, with square-root scaling
+ of flux/intensity - Good for very high dynamic range images
iii. fits2jpeg -n ngc4151.fits
iii. fits2jpeg -n ngc4151.fits
+
Converts ngc4151.fits to ngc4151.jpg, negative image.
Converts ngc4151.fits to ngc4151.jpg, negative image.
-iv. fits2jpeg -s square -n -r 10:2000 m31.fits
- Write out m31.jpg, after square scaling of flux/intensity,
- negate image and clip pixel values in the range 10 to 2000
- units.
+ iv. fits2jpeg -s square -n -r 10:2000 m31.fits
+
+ Write out m31.jpg, after square scaling of flux/intensity, negate image and
+ clip pixel values in the range 10 to 2000 units.
+
+ v. fits2jpeg -s equalize -r 200: -d/path/to/mydir NGS253*.fits
+
+ Reads all fits files in the present directory that matches the filename
+ patterm, performs a histogram equalization, drops pixel values below 200
+ and write out all the corresponding jpeg files to directory /path/to/mydir
+ Will create the destination directory tree if it does not exist.
+
+
+3.1. Sequence of operations
+---------------------------
+Here is the sequence of operations, after reading the fits file:
+
+ i. clip the image to user specified pixel limits, if it was requested
+ ii. Squeeze image pixel values to jpeg limits (0 - 255)
+ iii. image scaling function, default being linear pixel scale
+ iv. Negate the image, if requested
+ v. Image zoom - magnify or shrink the image
+ vi. Write out jpeg file
3. DOCUMENTATION
----------------
3. DOCUMENTATION
----------------
-An extensive coverage of how this program works along with line
-by line account of the happenings within the code, are dealt with
-in the user manual, which is yet to be written :(
+An extensive coverage of how this program works along with line by line account
+of the happenings within the code, are dealt with in the user manual, which is
+yet to be written :(
4. LICENSE: GPL [See the file COPYING.txt for details]
4. LICENSE: GPL [See the file COPYING.txt for details]
5. DISCLAIMER
-------------
5. DISCLAIMER
-------------
-You may encounter bugs in this software. If you do, please
-report them. Your bug reports are valuable contributions,
-since they allow us to notice and fix problems on
-machines/platforms we don't have, and/or remained un-noticed.
+You may encounter bugs in this software. If you do, please report them. Your bug
+reports are valuable contributions, since they allow us to notice and fix
+problems on machines/platforms we don't have, and/or remained un-noticed.
6. REPORTING BUGS
6. REPORTING BUGS
Either way, please include as many details as possible.
Either way, please include as many details as possible.
+
-----------------------------------------------------------
Reks, 28 June 2012 <reks_at_iiap.res.in>
Last modified: 10 July 2012
-----------------------------------------------------------
Reks, 28 June 2012 <reks_at_iiap.res.in>
Last modified: 10 July 2012